Tesla Wall Connector Installation in Ogden, UT

Copperview Electric is a Tesla Wall Connector Certified Installer. We mount and wire your Wall Connector, permitted and inspected, for Tesla owners across Weber, Davis, Morgan, Box Elder, and Cache counties.

Request a Free Quote 801-603-2094

Licensed & Insured
Tesla Certified Installer
Permit & Inspection

Tesla Wall Connector Certified Installer

Tesla Wall Connector Installation in Ogden, UT

What does a Tesla Wall Connector installation involve?

A Tesla Wall Connector is a hardwired home charger, so it connects directly to a dedicated circuit rather than plugging into an outlet. Installing one means choosing the breaker and wire for the amperage you want, mounting the unit, making the connection to Tesla’s specifications, and getting the work permitted and inspected. Copperview Electric is a Tesla Wall Connector Certified Installer, so that work is done by an electrician Tesla recognizes for this exact product. We handle the circuit, the mounting, the setup, and the paperwork.

Tesla Wall Connector hardwired through a junction box and flexible conduit in a garage

CredentialTesla Wall Connector Certified Installer

ConnectionHardwired to a dedicated circuit

WorkPermitted & inspected

LicensedUT 13884302-5501 (DOPL)

What we settle before your Wall Connector goes up

The Wall Connector itself is simple. The decisions around it are what make an install clean, and these are the ones we work through with you:

Amperage settingThe Wall Connector can be set to the current your circuit supports, so the breaker, wire gauge, and unit setting all have to agree.

Mounting spotCable reach to the charge port decides where it goes. We check where your Tesla actually parks before we pick the wall.

Cable and placementGarage wall, carport post, or exterior wall each change the conduit route and the weather protection.

Breaker and wireA hardwired charger needs the breaker and conductors matched to the unit’s rating, not just to what is on hand.

Permit and inspectionYour city sees the circuit before it is called finished. We file and schedule it.

More than one chargerPlanning a second Tesla or a second Wall Connector later? We lay the first install out so adding another is not a rewire.

Tesla Wall Connector mounted on a garage wall with surface conduit run along the base

What a certified Wall Connector install covers

From the panel to the first charge, the job includes:

Breaker and wiring sized to the amperage you choose for the unit
Mounting at the height and location that suits your parking
Hardwired connection to Tesla’s installation specifications
Wall Connector setup and Wi-Fi connection
City permit and final inspection
A test charge with your Tesla before we leave
A walkthrough of the Tesla app settings that matter

How a Tesla Wall Connector install works

STEP 01

Tell us about your Tesla

Model, how you drive, and where you park. That sets the amperage and the mounting location.

STEP 02

Site check & quote

We look at the run from panel to wall and give you one itemized quote with the permit included.

STEP 03

Permit

We file with your city so the circuit is legal, insurable, and ready for inspection.

STEP 04

Install

Breaker, wire, mounting, and the hardwired connection, done to Tesla’s specifications.

STEP 05

Test & walkthrough

We commission the unit, run a test charge, and show you the app settings.

Electric vehicle plugged in to a home charger in a Northern Utah garage

Why a certified installer for a Tesla Wall Connector?

The Wall Connector is hardwired, so the installer decides whether the unit is connected the way Tesla intends. Certification is Tesla’s recognition that an installer has been trained on that connection.

It also keeps the paperwork simple. Because we are certified on the product and licensed in Utah, you deal with one electrician for the circuit, the unit, and the inspection. Not sure whether you need a Tesla unit at all, or what any home charger costs? Our EV charger installation page covers every connector type, and our Utah cost guide covers pricing.

Have yours looked at

Certified by Tesla, licensed by Utah

Two credentials matter on a Wall Connector job. Tesla certifies the installer on its product, and Utah licenses the electrician and the contractor. Copperview Electric holds both, carries insurance on every job, and follows the National Electrical Code as adopted in Utah.

Request a Free Quote

TeslaWall Connector Certified Installer

LicenseUT 13884302-5501 (DOPL)

InsuranceCarried on every job

CodeNEC as adopted in Utah

Tesla Wall Connector installation across Northern Utah

We install Wall Connectors in garages, carports, and driveways from Brigham City to Bountiful.

Tesla Wall Connector questions, answered

Are you a Tesla Wall Connector Certified Installer?

Yes. Copperview Electric is a Tesla Wall Connector Certified Installer, and a licensed, insured Utah electrical contractor (UT 13884302-5501).

Do I have to use a certified installer for a Wall Connector?

We cannot speak for every warranty or incentive program, so check the terms that apply to your unit. What we can say is that a certified installer knows the product, and the work comes with a permit and inspection.

Can you install a Wall Connector I already bought?

Yes. Bring the unit or tell us the model, and we will confirm the circuit and mounting plan, then install it to Tesla’s specifications with the permit and inspection included.

Is the Wall Connector hardwired or plug-in?

The Wall Connector is installed hardwired to a dedicated circuit. That is why the breaker and wire sizing matter so much.

Will it charge a non-Tesla EV?

That depends on the Wall Connector model and adapter you have. Tell us the vehicle and the unit and we will confirm before install.

Do I need a permit for a Wall Connector?

Yes, a new dedicated circuit needs a permit and inspection in most Ogden-area cities. We pull the permit and schedule the inspection.